superiorhwa.blogg.se - Bellsouth 1010 walkie talkie manual

When the battery charge level is low, the battery icon will flash and aīeep will be heard to indicate that the batteries need to be replaced or Battery Full Battery 2/3 charged Battery 1/3 charged Battery empty Present inside the battery icon on the LCD Screen. The battery charge level is indicated by the number of squares Battery Charge Level/Low Battery Indication.Note: The volume level (3) is displayed on the screen.

To increase the volume, press the Up adjustor button (4) and press the Down (7) button to decrease volume. To turn the devices on or off, hold down the on/off button (6) for 3 seconds a BEEP sound will be played to confirm. Open the battery compartment (26) and insert 4 AAA batteries (25) (not supplied), ensuring that the poles are correctly aligned. Lift the attachment clip (23) and press the belt attachment upwards (24). To insert batteries into the devices, first remove the belt attachment:

Battery compartment BEFORE USE (Pic 02).

The device cannot be used to contact the emergency services.

In the event of damage occurring, ensure that the device is checked by a qualified professional. Avoid the use of cleaning agents and solvents. Direct the antenna upwards and speak normally.

Position the transmitter and antenna at least 25 cm from your face.

Remove the batteries if the device is not in use for an extended period of time.

Never use the device in close proximity to a radio to avoid interference.

Switch off the device if on an aeroplane or in a hospital.

If travelling in a car or by bike, stop before using the device.

around petrol pumps, on the lower deck of a boat or around a fuel storage installation or chemical products)

Do not use the device in a potentially explosive setting (e.g.

To avoid the risk of burns, do not use the device if the aerial is damaged in any way.

If you carry any kind of personal medical device, consult a doctor before use.